Comparesion Dead Zone of Mixing

727 views

04/04/2021 12:32

RESEARCH & DEVELOPMENT
MISCIBLE AGITATOR TESTING CENTER
Comparesion Dead Zone of Mixing
[Mixbeam.2B] .......... [Viscrop.2B]

[Mixbeam.2B]
d/D = 0.8
No.of Blades : 2
Tip Speed Same Calculate
Flow Pattern : 30%-10%-60%

[Viscrop.2B]
d/D = 0.45
No.of Blades : 2
Tip Speed Same Calculate
Flow Pattern : 70%-20%-10%

Note: Axial flow-Radial flow-Tangential flow

Thank You
Sataporn Liengsirikul
(Agitator Designer)
Tel : 091.7400.555
www.miscible.co.th
Email : miscible@miscible.co.th
MISCIBLE TECHNOLOGY CO., LTD.

Blogs

Mixing with Baffle and without Baffle

RESEARCH & DEVELOPMENT MISCIBLE AGITATOR TESTING CENTER Mixing with Baffle and without Baffle Comparesion Vortex Deepness & Dead Zone of Mixing [Withiut Baffle]——[With Baffle] Impeller Types: VISCROP.4B d/D = 0.45 No.of Blades : 4 Tip Speed Same Calculate Flow Pattern : 90%-10%-0% Note: Axial flow-Radial flow-Tangential flow Thank You Sataporn Liengsirikul (Agitator Designer) Tel : 091.7400.555 www.miscible.co.th Email : miscible@miscible.co.th MISCIBLE TECHNOLOGY CO., LTD.

Top Entering Mixers Mounted on the Tank Centerline

RESEARCH & DEVELOPMENT MISCIBLE AGITATOR TESTING CENTER Top Entering Mixers Mounted on the Tank Centerline Baffles must be provided for low viscosity mixing for top-entering mixers are located on the tank centerline. This also includes fixed mounted mixersmounted vertically on the tank cneterline. Baffles ensure that the entrie batch will pass through the zone of the impeller where thereis maximum agitation insensity. Other effects of baffles are that they [1]. Promote the flow pattern required for the process [2]. Direct flow from the impeller, producing the required vertical currents [3]. change the flow from a rotary (essentially static) pattern to a mixing pattern [4]. prevent excessive swirling, vortexing and air induction [5]. Greatly improve mixer-loading accuracy [6]. Assure a stable, consistent power draw [7]. Produce more uniform, radial shaft loads (less buffeting)which allows longer shaft lengths Thank You Sataporn Liengsirikul (Agitator Designer) Tel : 091.7400.555 www.miscible.co.th Email : miscible@miscible.co.th MISCIBLE TECHNOLOGY CO., LTD.

Comparesion On Center and Off Center of Impellers

RESEARCH & DEVELOPMENT MISCIBLE AGITATOR TESTING CENTER Comparesion On Center and Off Center of Impellers [Flatblades.T-On Center] .. [Flatblades.T-Off Center] [Flatblades.T] d/D = 0.33 No.of Blades : 6 Tip Speed Same Calculate Flow Pattern : 100%-0%-00% Note: Axial flow-Radial flow-Tangential flow Thank You Sataporn Liengsirikul (Agitator Designer) Tel : 091.7400.555 www.miscible.co.th Email : miscible@miscible.co.th MISCIBLE TECHNOLOGY CO., LTD.